Miele DAG 500 작동 및 설치 지침 - 페이지 12

{카테고리_이름} Miele DAG 500에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DAG 500 40 페이지. Downdraft ventilation system

Cleaning and Care

Before cleaning or servicing the

ventilation system, disconnect it

from the power supply, see

"Important Safety Instructions".

Cleaning the casing

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the ventilation

system. They will damage the

surface.

^ All external surfaces and controls can

be cleaned with a mild solution of

warm water and liquid dish soap

applied with a soft sponge.

^ Wipe dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate the electronics and cause

damage.

Avoid:

– cleaning agents containing lye, acids

or chlorides,

– abrasive cleaning agents,

e.g. powder or cream cleansers,

– abrasive sponges, i.e. pot scourers

or sponges which have been

previously used with abrasive

cleaning agents.

These will damage the surface.

The following instructions for cleaning

"Stainless steel" surfaces should be

followed in addition to the general

"Cleaning the casing" instructions.

Stainless steel

Stainless steel surfaces can be cleaned

using a non-abrasive stainless steel

cleaner.

To help prevent resoiling, a conditioner

for stainless steel can be applied.

Cleaners are available from Miele.