Miele DAG 600 작동 및 설치 지침 - 페이지 36
{카테고리_이름} Miele DAG 600에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DAG 600 40 페이지. Downdraft
Miele DAG 600에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)
페이지 인쇄
Electrical connection
Electrical connection of an
external blower
Disconnect the appliance from the
electrical power supply.
Install a connection cord from the
downdraft to the external blower.
Refer to the Operating and
Installation Instructions for the
DAG 1000 external blower.
Use the connection box supplied with
the DAG 1000 external blower for
connection to the downdraft.
Open the cover on the connection
box.
Remove the cover from the cord
entry, e.g. with the aid of a
screwdriver.
Install an approved cable clamp or
connector.
Guide the connection cord from the
external blower into the connection
box.
36
Connect the power cord. Please
check the enclosed wiring diagram.
Secure the connection box to a
suitable place, e.g. a cabinet wall.
If moisture gets into the unit, this can
cause an electric shock
Therefore, the connection box must
not be in contact with the floor.
Position and secure the cord and
other connection leads in a suitable
place.
Connect the power as described
previously.