Miele DAS 2920 작동 및 설치 지침 - 페이지 24

{카테고리_이름} Miele DAS 2920에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DAS 2920 36 페이지.
Miele DAS 2920에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Installation

Before installation



Before installation, it is important

to read the information contained in

this chapter and in the "IMPORTANT

SAFETY INSTRUCTIONS" chapter.

Information is subject to change. Please

refer to our website to obtain the most

current product specification, technical

& warranty information.

Installation recommendations

- To achieve optimum vapor extraction,

the hood must be centered over the

cooktop, not to the side.

- The cooktop should be no wider than

the hood. Preferably, it should be

narrower for better extraction.

- The mounting area must be easily

accessible. The ventilation hood

should be easy to reach and

disassemble in case a service call is

necessary. This should be taken into

consideration when planning the

position of cabinetry, shelves,

ceilings or decorative elements in the

vicinity of the ventilation hood.

Installation materials

1 non-return flap

for fitting into the exhaust socket on the

motor unit (not needed for recirculation

mode). Depending on the model, the

non-return flap may already be mounted.

4 mounting plates

for installation in a 23 ⁵/₈" (600 mm)

wide cabinet

2 brackets

for installation in a 35 ⁷/₁₆" (900 mm)

wide cabinet (only for 35 ¹/₄" (896 mm)

wide appliances)

2 spring clips

for installation in a 35 ⁷/₁₆" (900 mm)

wide cabinet (only for 35 ¹/₄" (896 mm)

wide appliances)

1 spacer strip

for concealing the gap between the

rear of the appliance and the wall