Miele DAS 4920 작동 및 설치 지침 - 페이지 17

{카테고리_이름} Miele DAS 4920에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DAS 4920 48 페이지.
Miele DAS 4920에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄

Selecting extraction mode or

recirculation mode

The ventilation hood can be operated

with either extraction mode or

recirculation mode. The power of the

blower is adapted to suit the selected

mode of operation. The ventilation

hood is set up at the factory for

recirculation mode. The ventilation

hood has to be reset for extraction

mode.

To reset it for extraction mode, the filter

saturation indicator for the charcoal

filter(s) has to be deactivated.

 Switch off the blower and the lighting.

 Press the  control and the

operating-hours control  at the

same time.

The charcoal filter symbol  and one of

the blower power level indicators will

flash.

 Press and hold the  control until the

B indicator starts to flash.

 Confirm the selection by pressing the

operating-hours control .

All the indicator lights will go out.

Extraction mode has now been set.

If the selection is not confirmed within

4 minutes, the system will revert to the

previous setting.

Before using for the first time

Setting up Miele@home

Required:

- a WiFi network

- the Miele app

- a Miele user account. You can

create a user account via the Miele

app.

Your ventilation hood is equipped with

an integrated WiFi module. Connect the

ventilation hood to your household WiFi

network. You will then be able to

operate the ventilation hood via the

Miele app.

Before installing the ventilation hood

in its final location, ensure that the

signal of your WiFi network is strong

enough.

You can connect to the household WiFi

network via the Miele app or via WPS.