Miele DDF 150 작동 및 설치 지침 - 페이지 13

{카테고리_이름} Miele DDF 150에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DDF 150 28 페이지. External motor roof installation
Miele DDF 150에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄

DDG 102

This motor is designed to be installed on

angled tiled, pantiled, slate or shingle

roofs; the slope of the roof must be at

least 22° to prevent the ingress of rain or

snow.

Consult a roof tiler for advice regarding

other types of roofing.

This motor is not suitable for

installation on flat roofs.

Installation must only be carried out

by a qualified competent person.

The external motor is connected to the

cooker hood by means of a control

cable, and is operated by the control

panel on the cooker hood.

Please refer to the notes in

"Connection for air extraction",

before installing the external motor

and ducting.

The ducting stub on the motor unit has

a diameter of 125 mm when the

appliance is supplied.

^ If a diameter of 150 mm is required,

the front ring of the stub must be cut

off at the join with a sharp knife (see

illustration).

Installation