Miele DDF 150 설치 지침 매뉴얼 - 페이지 14
{카테고리_이름} Miele DDF 150에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DDF 150 28 페이지. External motor roof installation
Miele DDF 150에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (24 페이지), 작동 및 설치 지침 (28 페이지)
페이지 인쇄
Installation
DDG 102
The DDG 102 is designed for
installation on angled tiled, pantiled,
slate or shingle roofs. The slope of the
roof must be at least 22° to prevent the
ingress of the elements, such as rain or
snow.
Consult a roofing expert for advice
regarding other types of roofing.
This motor unit is not suitable for
installation on a flat roof.
Installation must only be carried out
by a qualified and competent person.
The external motor is connected to the
cooker hood by means of a control
cable and is operated by the controls
on the cooker hood.
14
Please refer to the operating and
installation instructions for the
cooker hood before installing the
external motor and ducting.
The ducting collar on the motor unit has
a diameter of 125 mm when the
appliance is supplied.
If a diameter of 150 mm is required,
the front ring of the collar must be cut
at the join with a sharp knife.