Miele Imperial DWF 950-2 작동 및 설치 지침 - 페이지 14

{카테고리_이름} Miele Imperial DWF 950-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Imperial DWF 950-2 37 페이지.

페이지 인쇄

Cleaning and care

Before any cleaning or maintenance

work the cooker hood must be dis-

connected from the mains supply.

Ensure that:

- it is switched off at the fused spur

connection or

- it is switched off at the wall socket

and the plug has been withdrawn

(do not pull on the cable, only on

the plug), or

- the mains fuse is withdrawn.

Ensure current is not supplied to the

appliance while maintenance or re-

pair work is being carried out.

Lacquered surfaces can be cleaned

using hot water to which a little mild

washing-up liquid has been added.

Dry with a soft cloth.

For stainless steel surfaces a mild non-

abrasive proprietary stainless steel

cleaner is suitable.

Never use cleaners which scour or

contain chlorine, acids or soda.

These would damage the surface of

the cooker hood.

Re-usable metal grease filters are fitted

which remove solid particles (oil, dust,

etc.) from the kitchen vapours, prevent-

ing soiling of the cooker hood.

The grease filters should be cleaned

regularly to avoid a build-up of fat, (ap-

prox. 3-4 weeks on average, but

sooner if necessary). Always clean the

filters immediately if the lamp for the

grease filter touch control comes on.

An over saturated filter is a fire ha-

zard.

– To remove the grease filters pull the

quick-release catches.

– Carefully remove the filters in a down-

wards direction.

– Clean the filters

–

with a nylon brush in a

mild solution of warm water and

washing up liquid.

–

with the short side upright in the

lower basket, ensuring the spray

arm is not obstructed.

place the filter