Miele Imperial DWF 950-2 작동 및 설치 지침 - 페이지 22
{카테고리_이름} Miele Imperial DWF 950-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Imperial DWF 950-2 37 페이지.
페이지 인쇄Installation
The retaining plates A, B and C are
used to secure the cooker hood to the
wall.
– Before fitting the retaining plates
draw a centre line on the back wall
at the selected position.
Then drill holes for attaching the vapour
canopy and for fitting retaining plate A.
22
– Mark the measurement
cooking surface. This marks the
height of the lower rim of the cooker
hood.
– Drill four 8 mm Ø holes in the wall as
shown and press S8 plugs into the
holes.
– Screw retaining plate A to the wall
with 5 x 40 mm screws through both
holes and use the two notches to
help you align it with the centre line.
above the