Miele Imperial DWW 1256 EX 운영 및 설치 매뉴얼 - 페이지 27

{카테고리_이름} Miele Imperial DWW 1256 EX에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Imperial DWW 1256 EX 40 페이지.

– Proceed to "Connection for air ex-

traction" section.

If site conditions are not suitable for the

cooker hood to be used for air extrac-

tion the appliance must be connected

for recirculation.

– Push the directional unit on to the

top retaining plate.

– Fit the reducing collar ø150 / ø125

mm into the exhaust socket of the

motor unit.

– Secure the flexible hose supplied to

the directional unit and to the reduc-

ing collar on the motor unit using

hose clips.

– Insert the recirculation micro-filters

(see section "Cleaning and care").

The recirculation micro-filters

necessary for recirculation are avail-

able from the Spare Parts Depart-

ment or your dealer.

– Insert the mains supply plug into the

socket before carrying out further in-

stallation.

An extension piece allows the cooker

hood to be fitted at varying distances

from the ceiling (see section on "Ap-

pliance dimensions").

The extension piece has an opening on

each side. These are needed when the

appliance is being used in recirculation

mode.

Recirculation

For recirculation the extension piece is

fitted with the openings at the top.

For air extraction the openings are not

required. In this case the extension

piece is fitted with the openings at the

bottom. They are then covered by the

tower shaft.

Extraction