Miele PUR 88 W 작동 및 설치 지침 - 페이지 24
{카테고리_이름} Miele PUR 88 W에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PUR 88 W 36 페이지. Ventilation system
Miele PUR 88 W에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지)
페이지 인쇄
Installation
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the "IMPORTANT
SAFETY INSTRUCTIONS" chapter.
Removing the protective film
The housing components are covered
by a protective film to prevent them
from damage during transport.
Please remove this film before
installing the housing components. It
can be peeled off easily without any
additional tools.
Installation materials
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be mounted.
3 wall brackets
for securing the ventilation hood on the
wall
24
8 screws measuring 5 x 60 mm and
8 plugs measuring 8 x 50 mm
for attaching to the wall
The screws and plugs are
designed for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 M6 locknuts
for mounting the appliance unit
2 screws measuring 3.9 x 7.5 mm
for securing the chimney
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Leave these instructions with the
appliance for the consumer/user.
Information is subject to change. Please
refer to our website to obtain the most
current product specification, technical
& warranty information.