Miele PUR 98 W 작동 및 설치 지침 - 페이지 31

{카테고리_이름} Miele PUR 98 W에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PUR 98 W 40 페이지. Ventilation system
Miele PUR 98 W에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (36 페이지)

페이지 인쇄

1. Installation

Connection for air extraction



Before installation, it is important

to read the information given on the

following pages as well as the

"Appliance dimensions" and the

"Warning and Safety instructions" at

the beginning of this booklet. This is

particularly crucial when using the

rangehood at the same time as a

heating appliance that relies on

oxygen from the same room, which

could result in the build-up of toxic

fumes.

The rangehood should be installed

according to local and national

building regulations. Seek approval

from the building inspector where

necessary.

Only use smooth pipes or flexible

ducting made from approved non-

flammable materials for exhaust

ducting.

To achieve the most efficient air

extraction with the lowest noise levels,

please note the following:

- The diameter of the exhaust ducting

must not be smaller than the cross-

section of the exhaust connection

(see "Appliance dimensions"). This is

particularly applicable when using flat

ducting.

- The exhaust ducting must be as

short and straight as possible.

- Only use wide radius bends.

- The exhaust ducting must not be

kinked or compressed.

- All connections must be strong and

airtight.

- If the ducting has flaps, these must

be opened when the rangehood is

switched on.

Any constriction of the airflow will

reduce extraction performance and

increase operating noise.

Vent flue

If the exhaust air is to be ducted into a

vent flue, the ducting must be directed

in the flow direction of the flue.

If the flue is used by several ventilation

units, the cross-section of the flue must

be large enough.

Installation