Miele Novotronic T 220 사용 설명서 - 페이지 30
{카테고리_이름} Miele Novotronic T 220에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic T 220 44 페이지. Novotronic vented tumble dryer
Miele Novotronic T 220에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지)
페이지 인쇄
Installation - venting
Table II
Maximum effective
duct length allowable
10 m with Ring adapter
20 m without Ring adapter
40 m without Ring adapter
100 m without Ring adapter
3. Calculation example
A
Wall pipe, with louvred vent
= 1 x 3.8 m Additional duct
length
B/D 2 Elbows, 90°
= 2 x 0.8 m Additional duct
length
C
0.5 m plastic piping
= 0.5 x 1 m Additional duct
length
E
Side connection, left
= 1 m Additional duct length
Effective duct length
Result: A duct diameter of 100 mm is
adequate as the effective duct length is
less than the 20 m specified in Table II.
30
Internal duct di-
ameter required
100 mm
100 mm
125 mm
150 mm
= 3.8 m
= 1.6 m
= 0.5 m
= 1.0 m
= 6.9 m
Installation to the rear, left or
right hand side of the machine
At the rear
The dryer is delivered with this connec-
tion open.
^ Fit one of the venting systems de-
scribed on the following pages.
Left or right side of the machine.
^ Remove the left or right hand side
cover cap. Do not remove the frame.
Refit it in the rear outlet.
^ Ensure it is securely in position so
that it cannot fall out when the dryer
is in operation.
^ Fit one of the venting systems de-
scribed on the following pages.