HP 124708-001 1850 소개 매뉴얼 - 페이지 18
{카테고리_이름} HP 124708-001 1850에 대한 소개 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 124708-001 1850 22 페이지. System memory troubleshooting best practices for hp proliant servers
HP 124708-001 1850에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (18 페이지)
페이지 인쇄
Intel
Hyper-Threading Technology
®
Intel Nehalem-based processors re-introduce the support for HT Technology (simultaneous multi-
threading). HT Technology lets each core execute two computational threads at the same time, which
allows each four-core processor to simultaneously execute up to eight threads. In addition, the high-
bandwidth memory subsystem supplies data faster to the two computational processes, and the low-
latency cache hierarchy allows simultaneous processing of more instructions. HT Technology improves
performance-per-watt over previous generation Intel processor-based servers.
HT Technology achieves performance gains by reducing latency. The two threads are not executed in
parallel; rather, they share the resources of a single execution core. If one thread needs to use an
execution unit being used by the other thread, it must wait. As a result, processor throughput may only
increase by up to 30-percent and may vary based on the application and hardware platform. In
applications where software programmers minimize or effectively eliminate memory latencies through
cache optimizations, HT Technology may not yield measureable performance gains.
In comparison, a two-core processor running a single thread on each core provides true parallel
execution, delivering close to 100% performance improvement. In addition, a well-designed two-core
processor is more energy efficient than a single core processor running multiple threads. For these
reasons, processors based on the Intel Core microarchitecture did not support HT Technology.
Intel
®
Turbo Boost Technology
Turbo Boost Technology complements HT Technology by increasing the performance of both multi-
threaded and single-threaded workloads. The processor increases the clock frequency of all active
cores when it is operating below power and thermal design points set by the user. These design
points include the number of active cores desired, the estimated current consumption, the estimated
power consumption, or the processor temperature.
The three Turbo Boost control states are Off, Automatic, and Manual. When Turbo Boost is turned
Off, the processor operates only at the rated frequency. When Turbo Boost is set to Automatic, the OS
requests a higher performance state and the processor determines the optimum frequency. When
Turbo Boost is set to Manual, the user can manually disable cores using the BIOS (reboot required)
and increase the likelihood that Turbo Boost will be initiated (Figure 12).
Figure 12. Turbo Boost Technology: some cores turned off; remaining cores running at a higher frequency
There are at least three situations in which disabling processor cores can prove beneficial.
• Reducing power use. Disabling processor cores reduces processor power use. If a server is being
used in an application environment that does not depend heavily on multi-threading, disabling
cores can lower power consumption without materially affecting performance.
• Increasing overall performance. Some applications benefit from higher core frequency rather than
from additional cores. When Turbo Mode is enabled for Intel Nehalem processors, the power and
18