Miele PT 8401 사용 설명서 - 페이지 16

{카테고리_이름} Miele PT 8401에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PT 8401 26 페이지.

Miele PT 8401 사용 설명서

Reprogramming

Reprogramming individual drying
programmes
(Changing the Standard options)
Individual drying programmes can be altered to suit
specific requirements, practices and processes.
If the machine is connected to a payment system
(coin operation) it is not possible to reprogramme
the Standard options.
Before you begin, first ensure that:
– The dryer is switched off with the "On/Off" switch.
– The door is closed.
To access the programming level:
^ Press and hold the "START/STOP button and switch
the dryer on with the "On/Off" switch.
^ Hold the START/STOP button pressed in until the
light around the button stops flashing and lights up
constantly.
^ Release the START/STOP button.
– P will flash alternately with 1 in the segment display.
Programmable functions P 1- P 27 (see next page)
are selected by turning the rotary dial clockwise.
They can also be selected by pressing the
Temperature selection button (PT 8xx1) or the Low
temperature additional option button K (PT 8xx3).
Programmable options, e.g. 0 or 1 are selected with
the START/STOP button.
The Temperature selection LED on time controlled
machines (Profitronic B and B COP) or the Low
temperature additional option LED on residual
moisture controlled machines (Profitronic B Plus)
shows which programmable function is currently
selected.
A short (quick) flash represents one unit, a long
(slow) flash represents ten units.
Example: The 5th Programmable function is repre-
sented by the LED flashing five times quickly. The
10th Programmable function is represented by the
LED flashing once slowly. Programmable function
45 is represented by the LED flashing four times
slowly and five times quickly.
16
Example of reprogramming PT 8251, 8331, 8401
Profitronic B Timed programme machines
P 4 to alter the acoustic tone when a button is
pressed (see "Programmable functions").
^ Turn the time selection rotary dial three clicks
clockwise.
– The Temperature selection LED will flash four times
quickly.
– P will flash alternately with 0 in the segment display
(factory default).
Programmable option 0 = Off - 1 = On.
^ Pressing the START/STOP button will change the
option to 1.
To save the setting:
^ Switch the dryer off with the "On/Off" switch.
Example of reprogramming PT 8253, 8333, 8403,
8503, 8803 Profitronic B Plus Residual moisture
programme machines
P 2 to alter the buzzer which sounds at the end of
the programme (see "Programmable functions").
^ Turn the programme selection rotary dial one click
clockwise.
– The Low temperature option LED K will flash twice
quickly.
– P will flash alternately with 1 in the segment display.
Programmable option 0 = Off - 1 = On.
^ Pressing the START/STOP button will change the
option to 0.
To save the setting:
^ Switch the dryer off with the "On/Off" switch.