HP 18-1200 빠른 설정 매뉴얼 - 페이지 11

{카테고리_이름} HP 18-1200에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 18-1200 21 페이지. Quick setup guide
HP 18-1200에 대해서도 마찬가지입니다: 빠른 시작 (1 페이지), 매뉴얼 (13 페이지), 시작하기 매뉴얼 (25 페이지)

페이지 인쇄

Troubleshooting

Refer to the documentation provided by the product manufacturer for information

about peripheral-specific problems, such as issues with a monitor or a printer. The

following tables present some issues you might encounter while installing, starting

up, or using your computer and possible solutions.

For more information or for additional troubleshooting options, see Getting

information on page 1.

Computer does not start

Symptom

Possible solution

Error message:

Restart the computer.

Hard disk drive

Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

error.

Press and hold the Power button on the computer for 5 or more seconds to turn off the

computer, and then press the Power button to restart the computer.

Contact Support, whether it was possible or not to start up Windows.

Either the hard disk drive or the system board may need to be replaced.

Computer will

Ensure that the cables connecting the computer to the external power source are plugged in

not turn on or

properly. When the cables connecting the computer to the external power source are plugged

start.

in properly, and the wall outlet is functioning, the green power supply light on the back of the

computer should be on; if it is not, contact Support.

If the display (monitor) is blank, the monitor might not be properly connected. Connect the

monitor to the computer, plug it in, and turn it on. See Display (monitor – select models only)

on page 8.

Test the wall outlet by connecting a different electrical device to it.

Error message:

When drive activity stops, remove the disc and press the spacebar on the keyboard. The

Invalid system

computer should start up.

disk or Non-

System disk or

Disk error.

ENWW

Computer does not start