Miele T 1313 - ANNEXE 87 사용 설명서 - 페이지 18

{카테고리_이름} Miele T 1313 - ANNEXE 87에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 1313 - ANNEXE 87 40 페이지. Vented dryer

Frequently asked questions

What if the "Filter/Vent" indicator lights after cleaning the exhaust system?

Possible fault

The dryer is not operating efficiently

because the duct hose is too long.

What if the program runs too long or stops?

Possible fault

The airflow is insufficient in the area of

the dryer.

The lint filters are clogged.

The laundry was not spun sufficiently in

the washer.

The dryer is overloaded.

Metal zippers interfere with the dryer's

moisture sensors.

An airflow gap of 3/8" (10 mm) must be

provided between the machine and the

floor.

What if the laundry is not dry enough?

Possible fault

The load contained too many dissimilar items (size and fabric.)

What if water has collected around the drum opening?

Possible fault

This is condensed moisture from the laundry.

Fix

Check the exhaust length and diameter

(see "How to calculate the effective

duct length"). A long exhaust hose will

increase program times and energy

consumption.

If the exhaust hose cannot be

shortened, the indicator can be turned

off by a service technician.

Fix

Open a window or door to increase

airflow.

Clean the lint filters (see "Dryer care").

Select a higher spin speed in the wash

program.

Reduce the load size.

Select a timed program to avoid

overdrying.

This gap must not be blocked by a

toekick or thick piled carpets for

sufficient airflow.