HP 2133 사용자 설명서 - 페이지 16

{카테고리_이름} HP 2133에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 2133 39 페이지. Hp compaq presario,presario 2100: network guide
HP 2133에 대해서도 마찬가지입니다: 사양 (27 페이지), 사용자 설명서 (25 페이지), 기본 설정 (14 페이지), 사용자 설명서 (20 페이지), 멀티부팅 사용 설명서 (17 페이지), 유지 관리 매뉴얼 (14 페이지), 제품 수명이 다한 제품 분해 지침 (34 페이지)

Completing the Setup

Type the network name in the Network name (SSID) box.

Select the Data encryption (WEP enabled) check box.

Clear the The key is provided for me automatically check box.

Type the network key in the Network key box and again in the Confirm network key box.

NOTE—It is not necessary to select the Key format or the Key length before typing the network key. These

settings automatically change to the appropriate setting as the network key is typed.

The default settings in Microsoft Windows XP Service Pack 1 require IEEE 802.1x authentication. With IEEE

802.1x authentication enabled, connecting to a network requires a connection with an authentication server. If

the network has no authentication server, the connection is disabled every 3 minutes. Therefore, when

connecting to a network that has no authentication server, disable IEEE 802.1x authentication by doing the

following (if the network does have an authentication server, ignore this step):

•

Click the Authentication tab.

•

Clear the Enable network access control using IEEE 802.1x check box.

Click OK. The network name and icon appear at the top of the list under Preferred networks.

Page

User Guide