HP 2133 Mini-Note 기본 설정 - 페이지 7

{카테고리_이름} HP 2133 Mini-Note에 대한 기본 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 2133 Mini-Note 14 페이지. Hp 2133 mini-note: supplementary guide
HP 2133 Mini-Note에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 사용자 설명서 (20 페이지), 멀티부팅 사용 설명서 (17 페이지), 빠른 사양 (33 페이지)

페이지 인쇄

Recovering

In case of system failure, use the f11 recovery tool to recover your original hard drive image.

✎

The image includes the Windows operating system and software programs installed at

the factory.

CAUTION: Using

All files you have created and any software installed on the computer will be permanently

removed. The

that were installed at the factory. Software not installed at the factory must be reinstalled.

1. If possible, back up all personal files.

2. If possible, check for the presence of the HP Recovery partition. To find the partition,

click Start, and then click Computer.

✎

If the HP Recovery partition has been deleted, you will need to recover your

operating system and programs using the Windows Vista Operating System and

the Driver Recovery discs (purchased separately). For additional information,

contact technical support. Refer to the "Contacting technical support" section in

the back of this guide.

3. Turn on or restart the computer, and then press esc while the "Press the ESC key for

Startup Menu" message is displayed at the bottom of the screen.

4. Press f11 while the "Press <F11> for recovery" message is displayed on the screen.

5. Follow the on-screen instructions.

✎

Windows Vista provides additional recovery tools through the operating system. For

additional information, go to Help and Support.

✎

If you are unable to boot (start up) your computer, you must purchase a Windows Vista

Operating System DVD to reboot the computer and repair the operating system. For

additional information, contact technical support. Refer to the "Contacting technical

support" section in the back of this guide.

Turning off the computer

1. Save your work and close all programs.

2. Click Start, click the arrow next to the Lock button, and then click Shut down.

Getting Started

will completely erase hard drive contents and reformat the hard drive.

f11

recovery tool reinstalls the operating system and HP programs and drivers

f11

What's Next?