Miele T 1515 사용 설명서 - 페이지 26

{카테고리_이름} Miele T 1515에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 1515 36 페이지. Vented dryer
Miele T 1515에 대해서도 마찬가지입니다: 운영 매뉴얼 (28 페이지), 기술 정보 (42 페이지)

페이지 인쇄

For best drying results, avoid extra long

ducting with too many bends or angles.

Avoid ducting in tight corners.

Use flexible metal pipe or rigid metal

pipe for venting. Non-metallic flexible

hose should not be used since it is a

potential fire hazard.

The shorter the exhaust ductwork, the

more efficient the dryer will be. Ex-

pelled air is slowed down in the ducts

due to friction against the inner walls.

The shorter and smoother the inner

walls are, the less friction that will be

created.

An elbow or bend creates more friction

than a straight duct. An additional duct

length factor must therefore be added

for each elbow or bend (see Table 1.)

This factor expresses the restistance of

the bend in terms of a straight length of

duct.

The additional length factor is then

added to the measured duct length to

give the effective duct length.

A larger duct diameter helps to reduce

friction. The duct diameter should

therefore be increased with increasing

duct length.