Miele T 1520i 운영 매뉴얼 - 페이지 23

{카테고리_이름} Miele T 1520i에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 1520i 32 페이지. Vented dryer

Tape the centered template to the

panel.

Using a 3/8'' drill bit, drill 1/2'' deep

pilot holes at template locations 1

and 2 only.

Remove the template from panel.

Right-hand hinge

Left-hand hinge

Open the door and remove the

lower screw from upper hinge.

Using the screws provided, loosely

attach the front panel to the machine

door through the now empty lower

hinge hole and the corresponding

hole on the unhinged side of the

door (see illustration).

Align the front panel and tighten the

two screws.

The remaining pilot holes can now

be drilled into the front panel through

the holes in the machine door.

Use the remaining screws to securely

mount the front panel to the machine

door.

Installation