HP 226824-001 - ProLiant - ML750 소개 매뉴얼 - 페이지 5

{카테고리_이름} HP 226824-001 - ProLiant - ML750에 대한 소개 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 226824-001 - ProLiant - ML750 10 페이지. Visualization and acceleration in hp proliant servers
HP 226824-001 - ProLiant - ML750에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 구현 매뉴얼 (35 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 개요 (20 페이지), 구현 매뉴얼 (26 페이지), 소개 매뉴얼 (22 페이지), 문제 해결 매뉴얼 (18 페이지), 구현 매뉴얼 (11 페이지), 설치 매뉴얼 (2 페이지), 구성 매뉴얼 (2 페이지), 소개 매뉴얼 (19 페이지), 업데이트 매뉴얼 (9 페이지), 업데이트 매뉴얼 (16 페이지), 소개 매뉴얼 (12 페이지), 기술 개요 (9 페이지)

HP 226824-001 - ProLiant - ML750 소개 매뉴얼
The AMB is an intelligent chip that manages serial communication with the memory controller and
parallel communication with local DRAM devices (Figure 4). Each AMB receives signals (address,
write data, and command information) through the outbound links and re-transmits the signal to the
next FB-DIMM on the channel. Each AMB decodes the command data and ignores the commands that
are targeted for a different DIMM. The targeted AMB performs a read or write operation to local
DRAM devices through a parallel interface. In the case of a read operation, the AMB serializes data
from the DRAM devices and transmits it to the memory controller through the inbound links.
Inbound and outbound serial information is transmitted in packets, or frames. Each inbound frame is
18 bytes long (16 bytes of read data plus 2 bytes of ECC). The FB-DIMM channel clock operates at 6
times the speed of the DRAM clock so that one inbound frame to be transmitted in a single DRAM
clock cycle. The 6:1 clock ratio allows the data rate of the DRAM module to match the data rate of
the inbound link. For example, when using DDR2 533 DRAM on the FB-DIMM, the peak theoretical
throughput of both the DRAM devices and the inbound links is 4.3 GB/sec.
Each outbound frame is 120 bits (15 bytes) long and consists of a command and 9 bytes of write
data (8 bytes plus 1 byte of ECC). Note that the outbound links transport half the amount of data as
the inbound links per DRAM clock cycle (9 bytes compared to 18 bytes).
Figure 4. Advanced Memory Buffer block diagram (all AMB components not shown)
5