Miele T 4423 C 사용 설명서 - 페이지 17

{카테고리_이름} Miele T 4423 C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 4423 C 49 페이지. Honeycomb care condenser tumble dryer

^ Press the Start button.

The drying cycle begins.

The drying stage reached is shown by

the sequence indicator lamps on the

right hand side of the control panel.

At the end of the drying phase, a

cooling down phase commences to

cool the laundry down (the Cool air

indicator lamp lights up).

The drying level required has now been

reached.

The Anti-crease/Finish and the drying

stage reached indicator lamps light up.

The buzzer will sound at intervals

during the anti-crease phase if it has

been selected.

0 will then appear in the display.

^ Press the Door button to open the

drum door.

^ Remove the laundry.

Make sure that the drum is empty. If

items are left in the dryer, they could

be damaged by overdrying when

the dryer is next used.

^ After every cycle remove the fluff

from the fluff filter in the door and in

the door opening (see "Cleaning and

Care").

^ Empty the condensed water

container (where there is no external

drainage of the water).

^ The condenser unit should be

checked an cleaned on a regular

basis.

See "Cleaning and Care".

^ After each use, switch the dryer off

by pressing the l-On / 0-Off button.

^ Always close the door after use.

Clean out airways

This indicator lamp comes on to warn

you that the dryer is not working

efficiently.

This may be because:

– the fluff filters are clogged;

– the condenser unit is clogged.