Miele T 494 C 사용 설명서 - 페이지 12

{카테고리_이름} Miele T 494 C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 494 C 36 페이지.

페이지 인쇄

How to dry correctly

Hints on saving energy

Make sure that your laundry has been

thoroughly spun at the highest appro-

priate spin speed before drying. Spin-

ning at 1600 rpm, for example, saves

approximately 30% energy and time

compared with 800 rpm.

Load the full amount of laundry ac-

cording to the programme chosen

(see "Programme chart") for the

most economical drying related to

the size of the load. Make sure that

the drum is not over- or underloaded.

As far as possible, sort fabrics for:

– the type of fibre or weave

– the degree of drying required

– similar size of items

– the moisture content after

spinning.

This will help towards an even drying

result.

Ensure the room is well ventilated.

Switching on and loading

Fasten duvet covers etc to prevent

small items from being rolled up in-

side them.

Do up zips and tie fabric belts and

apron strings.

Press the "l-On / 0-Off" button.

Press the "Door" button and open

the door.

Make sure there is no washing

detergent dispenser among the

laundry, as this could melt and dam-

age the machine and the laundry.

Load the laundry very loosely into

the drum.

Do not overload the drum. Over-

loading can cause unnecessary

wear and tear to the laundry and

give a disappointing drying result.

Close the door.

Important: Please check that items

of laundry cannot be trapped by the

door, as this will cause damage to

the fabric.