Miele T 659 C 사용 설명서 - 페이지 32

{카테고리_이름} Miele T 659 C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 659 C 40 페이지. Novotronic for condenser tumble dryer

Installation

Fitting or changing the decor

panel

Note: The door should be shut for fit-

ting or changing the decor panel.

Remove the 4 screws from the decor

strip on the door catch side of the

door and remove the decor strip.

Unscrew the remaining 7 screws

from the lower and side decor strip

until the decor panel bows slightly

and can then be taken out or put in

place.

Reassemble in the reverse order and

tighten the screws.

Decor panel dimensions

The figures given in brackets indicate

the tolerance level in mm:

Width

= 587 (-1) mm

Height

= 602 (-1.5) mm

Thickness =

1 (+0.5) mm

Panels more than 1.5 mm thick require

an "adapter strip for a 4 mm thick de-

cor panel". This is available from your

Miele Dealer or the Miele Spare Parts

Department.

Note: The decor panel height requi-

red for the adapter strip must not

exceed 596.5 (-1.5) mm.