HP 290 G1 PCI Microtower Business 분해 지침 매뉴얼 - 페이지 2
{카테고리_이름} HP 290 G1 PCI Microtower Business에 대한 분해 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 290 G1 PCI Microtower Business 7 페이지. Sff business pc
HP 290 G1 PCI Microtower Business에 대해서도 마찬가지입니다: 제품 수명이 다한 제품 분해 지침 (10 페이지)
페이지 인쇄
Item Description
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
#1 screw driver ( Disassemble 1 pcs screw for access panel)
T15 screw driver ( Disassemble 3 pcs screw for HDD bracket)
T15 screw driver ( Disassemble 7 pcs screw for MB)
T15 screw driver ( Disassemble 4 pcs screw for MB)
T15 screw driver ( Disassemble 4 pcs screw for CPU cooler)
#1 screw driver ( Disassemble 4 pcs screw CPU Fan)
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Loosen 1 screw and remove access panel from housing.
2. Pull off ODD and HDD cable connector then remove ODD module by pushing ODD Latch.
3. Unlock 4 hooks then rotate to remove Front Bezel from housing.
4. Remove Dust filter from Front Bezel
5. Disassemble Front Cover
6. Loosen 3 screws then remove HDD BKT ASSY from housing.
7. Pull off all cables on MB.
8. Push 2 hooks then remove Fan duct.
9. Loosen 7 screws then remove MB
10. Loosen 4 screws then remove CPU cooler from MB.
11. Loosen 4 screws then Remove CPU Fan.
12. Loosen 4 screws then remove PSU.
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
N/A
Include the cartridges, print heads, tubes, vent
chambers, and service stations. N/A
N/A
N/A
N/A
HPI instructions for this template are available at
EL-MF877-01
Quantity of
items
included in
product
0
0
0
0
0
Tool Size (if
applicable)
2.0~4.0
Kgf-cm
3.0~4.0
Kgf-cm
3.0~4.0
Kgf-cm
3.0~4.0
Kgf-cm
3.0~4.0
Kgf-cm
4.0~5.0
Kgf-cm
Page 2