Miele T 8903 C 사용 설명서 - 페이지 26
{카테고리_이름} Miele T 8903 C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 8903 C 48 페이지. Condenser tumble dryer
페이지 인쇄
Problem solving guide
Check and fault messages
Problem
The Empty out
container
indicator light
comes on.
The
Finish/Anti-crease
indicator light
flashes while
drying.
Cancel the
programme. Cool
air flashes. The
buzzer sounds.
Cancel the
programme.
The
Finish/Anti-crease
indicator light
comes on.
The buzzer
sounds.
Cancel the
programme.
Cool air or
Finish/Anti-crease
flashes.
The buzzer
sounds.
26
Possible cause
The condensed water
container is full or there is a
kink in the drain hose.
The programme selector
was turned after the start of
the programme. However,
the programme finishes
without problems.
The dryer is not working
efficiently or economically.
This is not a fault.
The electronic unit
recognised that there was
no laundry in the drum and
cancelled the programme.
Drying individual garments
or items which are already
dry can also cause the
programme to be cancelled.
There is no immediate
cause.
Remedy
– Empty out the condensed
water container.
– Check the drain hose.
– The indicator light will go
out when the door is
opened and closed again.
Set the originally selected
programme: The indicator
light will go out.
See previous page: The
drying process goes on too
long (...).
Use the Warm air
programme (timed drying) to
dry individual items.
– Open and close the door.
– Switch the dryer off and
then on again.
– Start a programme.
If the programme stops
again and Cooling down or
Finish flashes again, there is
a fault. Contact Miele.