Miele T1329C 설치 지침 - 페이지 2

{카테고리_이름} Miele T1329C에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T1329C 3 페이지. Large capacity vented dryers flat controls, stacked washer & dryer example combination
Miele T1329C에 대해서도 마찬가지입니다: 기술 정보 (3 페이지), 제품 치수 (12 페이지), 기술 정보 (3 페이지)

페이지 인쇄

Installing the Stacking Kit (Fig.3)

• After removing the washer lid, lay the

stacking into position on top of the

washer.

• Secure the stacking kit with the screws

provided.

o 2 screws with star washers in the

rear (a)

o 4 screws without star washers on

top.

Dryer Grille Replacement (Fig. 4)

Fig.5

• While supporting the door, remove the hinge

screws.

Fig.4

• Place the door to the side.

• Remove the screw caps from the dryer grille.

• Remove the screws and grille.

• Place the provided grille into position and

secure with screws.

• Install the screw caps

Note

T1329C door panels must be trimmed when

installing a stacking kit.

Custom panels must be 231/4"L X 231/4"H,

when installing a stacking kit on a T1329C

dryer.

Trimming the Dryer Door Panel (Fig.5)

• Remove the trim frame from the dryer door.

• Using a fine bladed jigsaw, cut 1 13/16" from

the bottom of the door.

• Using a hack saw, shorten the side trim by

1 13/16"

• Install the trim on the door.

• Install the door.

Fig.3