Miele TOUCHTRONIC T 8002 운영 및 설치 매뉴얼 - 페이지 26

{카테고리_이름} Miele TOUCHTRONIC T 8002에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele TOUCHTRONIC T 8002 44 페이지. Vented dryer
Miele TOUCHTRONIC T 8002에 대해서도 마찬가지입니다: 제품 치수 (11 페이지), 제품 치수 (6 페이지), 운영 및 설치 매뉴얼 (44 페이지)

Miele TOUCHTRONIC T 8002 운영 및 설치 매뉴얼

IMPORTANT SAFETY INSTRUCTIONS

, WARNING - Risk of Fire
~
To reduce the risk of severe injury or
death, follow all installation instructions.
~
Clothes dryer installation must be
performed by a qualified installer.
~
Install the clothes dryer according to
the manufacturer's instructions and
local codes.
~
Repair and maintenance work
should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and could void the warranty.
~
Before installation, disconnect the
tumble dryer from the electrical supply
by shutting off the power main,
unplugging the power cord or tripping
the circuit breaker. Do not restore
power until the installation is complete.
~
GROUNDING INSTRUCTIONS
This appliance must be grounded. In
the event of malfunction or breakdown,
grounding will reduce the risk of
electric shock by providing a path of
least resistance for electric current. This
appliance is equipped with a cord
having an equipment grounding
conductor and a grounding plug. The
plug must be inserted into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
22
~
WARNING – Improper connection of
the equipment grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
service representative or personnel if
you are in doubt as to whether the
appliance is properly grounded.
~
Do not modify the plug provided
with the appliance! If it will not fit the
outlet, have a proper outlet installed by
a qualified electrician.
~
Do not use an extension cord to
connect this appliance to the power
supply. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
~
This dryer must be vented outdoors
to reduce the risk of fire. Be sure to
observe local building codes.
~
Do not install a clothes dryer with
flexible plastic venting materials. If
flexible metal (foil type) duct is
installed, it must be of a specific type
identified by the manufacturer as
suitable for use with clothes dryers.
Flexible venting materials are known to
collapse, be easily crushed, and trap
lint. These conditions will obstruct
clothes dryer airflow and increase the
risk of fire.
~
Use flexible or rigid metal pipe for
venting. Non-metallic flexible hose
should not be used, it is a potential fire
hazard.
~
The appliance shall not be
exhausted into a chimney, a wall, a
ceiling, an attic, a crawl space, or a
concealed space of a building.