Miele TOUCHTRONIC T 8013 C 작동 및 설치 지침 - 페이지 33
{카테고리_이름} Miele TOUCHTRONIC T 8013 C에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele TOUCHTRONIC T 8013 C 40 페이지. Large capacity vented dryer angled control
Miele TOUCHTRONIC T 8013 C에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 치수 매뉴얼 (9 페이지)
페이지 인쇄
Installation beneath a counter
,
When the machine lid needs to
be removed to reduce the height of
the machine, a built-under spacer
kit* is necessary.
It must be installed by a Miele
Service Technician.
The cover plate of the built-under kit
replaces the appliance lid and
ensures electrical safety.
An installation manual is supplied with
the built-under spacer kit.
The electrical connection should be
near the dryer and accessible at all
times.
Extended machine feet* are
recommended at a built-in height of
1
more than 33
/
16
^ Set the extended machine feet on a
9
height of 1
/
16
Remove the original machine feet
and replace them with the extended
ones.
One or two filler frames* are
recommended at a niche height of
1
13
34
/
" / 34
/
" to 36" / 36
4
16
(870/885 - 915/930 mm).
* (optional accessory)
An existing continuous toe kick must
be interrupted at the dryer location!
" (840 mm).
" (40 mm).
5
/
"
8
Reinstallation of the machine lid
When reinstalling the appliance lid,
check the firm fit of the cover at the rear
bracket for a safe transport of the dryer.
Installation
29