Miele TWF160WP 빠른 시작 매뉴얼

{카테고리_이름} Miele TWF160WP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele TWF160WP 2 페이지. Heat-pump dryer

페이지 인쇄

Initial commissioning

Operation

寿

Before using the tumble dryer for

the first time, ensure that it is correctly

installed and connected.

If the tumble dryer has not been trans-

ported as described in "Installation and

connection" then it must be left to stand

for at least 1 hour before it is connected

to the electricity supply. Otherwise the

heat pump can be damaged.

It is essential to read the operating instruc-

Control field

Optical interface

tions.

The control field consists of a display and

for service technicians.

various sensor buttons.

Sensor buttons for extras

Display

You can supplement the drying program

Different values are displayed and/or

with extra options.

selected on the display:

Sensor button 

Sensor buttons 

You can use the  sensor button to call

The values in the display can be changed

up an energy consumption forecast for

with the  sensor buttons.

the selected drying program.

OK sensor button

Sensor button 

Confirm the selected values with the OK

The sensor button  starts the delay

sensor button.

start function.

Perfect Dry indicator 

Start/Stop sensor button

With programs with a selectable drying

Touching the Start/Stop sensor button

level, the Perfect Dry system calculates

starts the selected program or cancels a

the residual moisture present in the laun-

program that has already been started.

dry to ensure a precise drying result.

The display flashes at the beginning of

the program and lights up towards the

end of the program.

Energy saving tips

To avoid unnecessarily long drying times

– Load according to the optimum

and high consumption of energy:

amount of laundry recommended for

– Make sure your laundry is spun at the

the program being used. This will mean

maximum spin speed before drying.

that the energy consumption for the

amount of laundry is at its most eco-

nomical.

– Clean the lint filters after every drying

cycle.

Drying

1. Notes on correct laundry care

寿

Remove foreign objects like detergent dispensing

Switching on the tumble dryer

devices from the laundry.

Turn the program selector to a program.

They can melt and damage the dryer and the laundry.

The welcome tone will sound and the wel-

come screen will light up. The display will

Sort the laundry according to the type of fiber and

now guide you through the initial commis-

weave, size, garment care label symbol, and the drying

sioning, which is divided into several steps.

level required.

For further information please refer to the

Untangle the laundry.

separate operating instructions supplied.

Check seams and stitching to ensure that padding and

linings are intact.

Fasten duvet covers and pillow cases to prevent small

items from being rolled up inside them.

Fasten hooks and eyes.

Tie together textile belts and apron ties.

Program selector

Sew in or remove underwiring from bras.

For selecting programs and for switch-

ing off the machine. The tumble dryer is

switched on when you select a program,

and switched off by turning the program

selector to the  position.

Operating the sensor buttons

The sensor buttons react to fingertip con-

2. Selecting a program

tact. Selection is possible as long as the

respective sensor button is illuminated.

Turn the program selector to a program.

If a sensor button is brightly lit,

The interior drum lighting will come on.

this means: currently selected

Condensed water container

If a sensor button is dimly lit,

Program selection

– empty after every drying program

this means: selection possible

There are three possible ways to select a program:

Door

Control panel

1. Selecting the standard programs with the program

Access panel for the heat exchanger and plinth filter

selector dial

– do not open during drying

Turn the program selector to the required program.

Cold air intake grille

The selected program will be shown in the display. This

– do not obstruct with a laundry basket or other objects

will then be replaced by the standard display.

2. Selecting more programs by setting the program

– Make sure the room temperature is not

selector to the "More programs/" position and the

too high.

display.

3. Selecting the programs via the MobileControl 

If there are other heat producing appli-

Turn the program selector to the More programs/

program selector position and the Miele@mobile app

ances in the room in which the tumble

position.

Turn the program selector to the MobileControl  position.

dryer is located, make sure the room

The following will appear in the display: Time Dry

Follow the instructions in the display.

is well-ventilated and switch the other

Touch the  sensor buttons until the program you

Touch the "Start/Stop" sensor button.

appliances off, if possible.

want appears in the display.

The dryer can now be operated via a mobile device together

Confirm the program with the OK sensor button.

with the Miele@mobile app.

3. Loading the tumble dryer

6. Program end – removing the

Selecting an extra option

laundry

Open the door.

Touch the sensor button for the extra you

Unfold the laundry and load

want. It then lights up brightly.

The program is finished when End/

loosely into the drum.

Freshen up

Anti-crease or End appears. The Start/Stop

寿

For removing or reducing odors in clean

button light goes out.

Do not overload the drum.

(dry or damp) clothing.

– To save energy, 10 minutes after the end

Overloading can cause unnec-

Gentle

of the program the Start/Stop sensor but-

essary wear and tear to the laun-

Low temperature for delicate fabrics with

the  symbol on the care label, e.g. acrylic

ton will begin to flash slowly and the dis-

dry, give a disappointing drying

play will go out.

result and cause more creasing.

garments.

– The tumble dryer switches off automati-

寿

If you are not using a fra-

Anti-crease

cally.

grance capsule: The tab must be

Helps to prevent creasing if the laundry is

寿

Do not open the door before the end

pushed down completely (see

not removed immediately after the end of a

of the program.

arrow).

program.

Buzzer

Open the door.

寿

When closing the door, make

A buzzer sounds to let you know the pro-

sure that laundry does not get

gram has finished.

trapped in the door opening.

Shut the door with a gentle

swing.

 EcoFeedback

You can use the  sensor button to call

up an energy consumption forecast for the

selected drying program.

Remove the laundry.

Touch the  sensor button.

寿

Check that all items have been

4. Selecting program settings

The estimated energy consumption levels

removed from the drum. If items are left

will be displayed as a bar chart.

in the dryer, they could be damaged by

Programs with drying levels

overdrying when the dryer is next used.

Normal, Wrinkle-free, Delicates, Smoothing, Dress Shirts,

 Delay start/SmartStart

Express, Denim, Outdoor, Sportswear, Table Linen/

Delay start

The inside of the drum lights up so that

Drapes, Bed linen

With the delay start function, you can delay

you don't forget any items of laundry

The pre-set drying level can be changed if required.

the start of the program. The start of the

when you empty it.

Touch the  or  sensor buttons to change the dry-

program can be delayed from 15 minutes

The drum lighting switches off

ing level.

up to a maximum of 24 hours.

automatically (energy saving).

SmartStart

Turn the program selector to .

Time-controlled and other programs

With the SmartStart function you can define

Clean the lint filters.

Time Dry, Cold Air, Basket

a time period during which your dryer will

Close the drum door.

You can change the duration in ten-minute increments.

be started automatically by a signal, for

Empty the condensed water container.

Touch the  or  sensor buttons to change the dura-

instance to make use of cheaper electric-

tion.

ity rates.

Woollens/Silks, Proofing

5. Starting a program

The drying result is preset by the dryer and cannot be

altered.

Touch the flashing Start/Stop sensor but-

ton.

The Start/Stop sensor button will light up

and

Drying will appear in the display.

Changing the program

Fragrance capsule

Emptying the condensed water

You cannot change to another program

Tip: Using a fragrance capsule will add a

container

once a program has started (this prevents

pleasant fragrance to your laundry.

unintentional alterations). If you move the

寿

Before using a fragrance capsule,

program selector,

Cannot be changed will



please read "IMPORTANT SAFETY

Empty the condensed water container

light up in the display until you move the

INSTRUCTIONS – Using a fragrance

after every drying program.

program selector back to the original pro-

capsule (optional accessory)" and



Empty container See .

gram.

"Fragrance capsule" in the operating

will light up in the display if the maximum

Exception: The dryer is switched off by

instructions.

level of the condensed water container is

turning the program selector to the  posi-

reached.

tion.

Inserting a fragrance capsule

To turn the message off: Open and close

You will need to cancel the current program

the door while the dryer is switched on.

before you can select a new one.

Remove the

condensed water

Canceling a program

container.

Touch the Start/Stop sensor button.

Cancel program

will light up in the display.

Confirm with the OK sensor button.

As soon as

Program canceled

lights up:

Turn the program selector to .

To prevent water running out, keep it in a

horizontal position when carrying it. Hold

The current program can also be

it at the front and towards the back.

canceled in this way

Empty the

Turn the program selector to .

condensed water

Select a program.

container.

Touch the Start/Stop sensor button.

Markers  and  must line up with

Replace the con-

The drying cycle begins.

densed water

one another.

container in the

Adding or removing laundry

dryer.

寿

Bear in mind that hot steam can

寿

Do not drink condensed water. It can

escape after the door is opened.

cause health problems in people and ani-

Pull open the door.

mals.

Add or remove items.

Close the door.

Touch the Start/Stop sensor button.

The program starts.

Turn the outer ring clockwise a little.

Program duration

Altering the program sequence can cause

the program duration shown in the time dis-

play to be adjusted.

Before drying

Turn the outer

ring clockwise.

The further you open the capsule, the

more intense the fragrance.

After drying

To avoid the fragrance escaping need-

lessly:

Turn the outer

ring counter-

clockwise until

marker  is in

position .

If you want to dry laundry occasionally

without adding fragrance: Remove the

fragrance capsule and store it in its orig-

inal packaging until you want to use it

again. See the following section.

Before cleaning the lint filters

Remove the

fragrance

capsule

(reverse points

3 and 4) and

store it in its

original packa-

ging.

寿

Never lay the fragrance capsule

down on any surface as the fragrance

will spill out.