HP 8530w - EliteBook Mobile Workstation 매뉴얼 - 페이지 3

{카테고리_이름} HP 8530w - EliteBook Mobile Workstation에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 8530w - EliteBook Mobile Workstation 7 페이지. Hp elitebook mobile workstation
HP 8530w - EliteBook Mobile Workstation에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 빠른 사양 (36 페이지), 사용자 설명서 (15 페이지), 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (16 페이지), 사양 (4 페이지), 액세서리 매뉴얼 (2 페이지), 브로셔 및 사양 (6 페이지), 사용자 설명서 (27 페이지), 설정 매뉴얼 (19 페이지), 개요 (16 페이지), 매뉴얼 (12 페이지), 소프트웨어 설치 매뉴얼 (8 페이지), 매뉴얼 (6 페이지), 설정 및 구성 매뉴얼 (18 페이지), 매뉴얼 (20 페이지), 사용자 설명서 (28 페이지), 빠른 사양 (47 페이지)

BIOS Recovery

BIOS Recovery is a utility that allows you to recover the BIOS image if it becomes corrupt. BIOS

Recovery can be employed in two ways. It can automatically detect and repair a corrupted BIOS by

flashing the BIOS image that is stored on the partition into the flash ROM. It can also be used to force

a BIOS recovery.

Initially, the BIOS recovery directory on the EFI partition contains the first released version of the BIOS

for the platform. Later, as HP releases BIOS updates, two HP BIOS flash utilities (HPQFlash and SSM

flash) automatically update the partition with the most current version of the BIOS. Note that the

current version of the eROMPAQ flash utility does not support this function.

Launch EFI applications as follows:

Quick Look: Press the info button to start QuickLook from the off state (S5) or Hibernation (S4). If

QuickLook is disabled in BIOS, the button is inactive while the computer is off, in the Sleep state, or

in Hibernation.

HP Note

Pressing the info button when the system is in the Sleep state

(S3) does not launch QuickLook or Info Center. Rather, the

computer returns to the state it was in prior to entering the Sleep

state.

System Diagnostics: Press the Esc key when the "Press Esc for startup menu" message displays when

you boot the computer. Then press F2 to launch System Diagnostics. F2 will not wake the system

from the off state or the Sleep/Hibernation state. F2 can be used only during POST when the BIOS

keys are displayed.

BIOS Recovery: Hold down the four arrow keys, and then press the power button to launch BIOS

Recovery.

If you use your own custom image and you want to maintain EFI partition functionality, you must

create a FAT32 partition named HP_TOOLS. Failure to do so results in the loss of the following

features:

Ability to start QuickLook by pressing the info button

Automatic BIOS corruption detection and recovery

Ability to use all System Diagnostics functions