Miele Dynamic U1 HS08 사용 설명서 - 페이지 16

{카테고리_이름} Miele Dynamic U1 HS08에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Dynamic U1 HS08 32 페이지.

Miele Dynamic U1 HS08 사용 설명서
en
Replacing the "Air Clean" filter (see
fig. 30, 31 + 32)
Do not use more than one filter at a
time.
^ Open the exhaust filter compartment
lid.
^ Remove the filter frame.
^ Open the filter frame and use one of
the two clean corners to remove the
used Air Clean filter.
^ Insert a new Air Clean filter.
If you wish to replace the Air Clean
filter with an ActiveAirClean 30 filter
or HEPA AirClean 30 filter see
"Maintenance and care -

Exchanging exhaust filters".

^ Close the filter frame and insert it
back into the compartment.
^ Close the exhaust filter compartment
lid.
Replacing the "ActiveAirClean 30"
filter and the "HEPA AirClean 30"
filter (see fig. 33)
Do not use more than one filter at a
time.
^ Open the exhaust filter compartment
lid.
^ Remove the exhaust filter.
^ Insert the new exhaust filter and
press the exhaust filter change
indicator ~ (see fig. 5).
16
^ After about 10-15 seconds, a small
red marker will appear in the left-
hand side of the display (see fig. 6).
^ Close the exhaust filter compartment
lid.
If you wish to use an Air Clean filter
see "Exchanging exhaust filters".
Exchanging exhaust filters
Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 2):
a Air Clean
b ActiveAirClean 30 (black)
c HEPA AirClean (white)
If you wish, you can use one of the
alternative filters instead of the
standard filter supplied with your
appliance. Each filter offers different
characteristics (see section "Optional
accessories").
Important
1. If you replace exhaust filter a with
exhaust filter b or c, you must be sure
to remove the filter frame before
inserting the new filter type. The
exhaust filter change indicator must
also be activated (see fig. 5).
2. If you replace exhaust filter b or c
with exhaust filter a, be sure to place
the new filter in a filter frame *
(see fig. 31).
Do not use more than one filter at a
time.
* Filter frame - see "Optional accessories"