Miele S 2130 기술 정보 - 페이지 18

{카테고리_이름} Miele S 2130에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele S 2130 34 페이지. Vacuum cleaners
Miele S 2130에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지)

Technical Information

Function

2.1

A clean bag is essential to the maximum efficiency of the vacuum. A clogged

bag can cause restricted airflow resulting in poor suction or, in extreme

cases, an overheat condition can occur resulting in the vacuum shutting off.

Changing the bag is relatively easy; the most important thing to remember is

to use the correct bag. A list of bags and the models in which they are used

can be found in the product line information in the operating manual.

2.2

To test the bag change indicator:

1. Connect the floor attachment to the suction hose.

2. Switch on the vacuum cleaner.

3. Set the selector to full power.

4. Lift the floor attachment from the floor. If the window in the bag change

indicator is completely red, then the bag must be changed. See Section

020-4.7 for instructions.

The display function is set for mixed dust (dust, hairs, threads, carpet fluff,

sand, etc.).

If large quantities of fine dust (e.g., from drilling holes in masonry, fine sand,

etc.) are vacuumed, the bag pores are quickly blocked. The bag change

indicator then indicates "full" even though it is not actually full. However, the

bag should still be replaced.

If large quantities of hair, carpet fluff, etc., are vacuumed, the indicator might

not react until the bag is stuffed full.

S2 Canister Vacuums