Burk PlusConnect GatesAir ZXA 설치 및 운영 매뉴얼 - 페이지 11

{카테고리_이름} Burk PlusConnect GatesAir ZXA에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burk PlusConnect GatesAir ZXA 13 페이지.

To create a custom view with a PlusConnect template:

1. Open the Custom View Editor by selecting File  New 

Custom View.

2. When the Custom View Editor opens, select File  New

From Template... This opens the Load Template dialog.

3. Browse for the desired template. The default location for

templates is %ProgramFiles%\Burk Technology\AutoPilot

2010\Templates\Custom Views. Choose the PlusConnect

folder, followed by GatesAir ZX Series.

4. Select template for the PlusConnect GatesAir ZX.

5. Select the Network and Site for the Arc Plus connected to the PlusConnect.

6. Enter the Starting channel for the PlusConnect parameters. This starting channel must be the

same as the starting channel you used when adding the PlusConnect to the ARC Plus site.

7. Press OK. AutoPilot will load the template in the editor and automatically populate the

channels.

8. Save the Custom View using the Save icon in the tool bar.

9. Close the editor. You may then select the Custom View for display in AutoPilot.

Operation

Once the PlusConnect parameters are mapped to ARC Plus channels using AutoLoad Plus, accessing

the transmitter parameters is no different from any other ARC Plus channel. You may view channels

using:



The front panel of the ARC Plus



The front panel of any ARC Plus configured for site-to-site operation with this site



The built-in web interface



A mobile device, via the built-in mobile web interface



AutoPilot



The ESI/RSI

For more information on using the ARC Plus to monitor and control the remote site, please see the ARC

Plus Installation and Operation Manual.

Note that the PlusConnect channels are routed only through the ARC Plus unit specified during

PlusConnect configuration. In order to access the transmitter by any means, the ARC Plus unit must be

powered and connected to the network.

PlusConnect™ GatesAir ZXA Installation and Operation Manual

Load Template dialog