360 YIELD CENTER BANDIT KINZE 3000 설치 지침 - 페이지 3

{카테고리_이름} 360 YIELD CENTER BANDIT KINZE 3000에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 360 YIELD CENTER BANDIT KINZE 3000 3 페이지.

INSTALLATION INSTRUCTIONS

KINZE 3000

STEP 7 | INSTALL CLOSING SYSTEM

Attach the tensioning spring on the closing system to the

spring hook on the BANDIT extension bracket.

NOTE: The amount of spacer washers required will differ

between planters/row units. Spacer washers have been

provided to fill the gap between the closing wheel arms and

the BANDIT extension bracket. Use the quantity of spacer

washers required for your system.

Align square holes in extension bracket with required

amount of spacer washers 1 and holes in closing system

arms 1. From the inside to the outside, slide supplied

2-1/4" carriage bolt through all parts (carriage bolt head on

the inside). Secure all parts with the previously set aside

two-piece bushing 1 and provided 1/2" nyloc nut. Tighten

with 1/2" socket. Adjust bushings according to OEM specs.

Using 15/16" socket and wrench, reinstall closing wheels.

NOTE: If the optional Chain Kit is being installed, do not

reinstall the closing wheels.

PAGE 3 | 360YIELDCENTER.COM

STEP 5 | ASSEMBLE PLUMBING

NOTE: If hoses are not fully seated in the push to connect,

they will leak. Hoses seat 7/8" of an inch deep or until you

hear a snap.

Install orifice plates 1 in the rubber grommets 1.

Assemble pluming components in the arrangement shown

above 1. The supplied push to connect adapter in the 360

BANDIT kit connects to 3/8" push to connect compatible hose.

Secure hoses to row unit with provided zip ties 1.

PLUMBING RECOMMENDATIONS:

To prevent excess fertilizer from dribbling out of the hoses

when product application is shut off, install one push to

connect polypropylene (Inlet x Outlet) 3/8" O.D. check valve

(not included) in the plumbing to each row prior to the 360

BANDIT orifices. Check valve is available at Dultmeier Sales

(Item #BUCV1103-P38).

A 50 mesh strainer (not included) can be used in the

complete plumbing system between tanks and 360

BANDIT to help prevent debris from blocking orifices.

INSTALLATION COMPLETE