Miele S 6000 사용 설명서 - 페이지 32
{카테고리_이름} Miele S 6000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele S 6000 40 페이지.
Miele S 6000에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지)
Maintenance and care
When to change the thread
lifters
The thread lifters on the suction inlet of
the floorhead can be replaced.
Check them from time to time if the pile
has worn down.
Replacing the thread lifters
^ Use a knife or similar object to
remove the thread lifters from the
slots. There are two grooves to help
you.
^ Fit new thread lifters.
FiberTeQ and AirTeQ floorheads
^ Use a knife or similar object to
remove the thread lifters from the
slots.
^ Fit new thread lifters.
Cleaning the roller on the floorhead
(not possible for FiberTeQ and AirTeQ
floorheads)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove it.
c Take out the roller.
^ Remove any threads and hair,
replace the roller and refit the
bearing.
Replacement parts are available from
your Miele dealer or from Miele (see
back cover for contact details).
32