Miele TX2070 작동 및 설치 지침 - 페이지 21

{카테고리_이름} Miele TX2070에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele TX2070 44 페이지.

Reading the filter operating hours

counter

To check the percentage of time set

already used:

 Switch the fan on with the On/Off

control .

 Press and hold the grease filter con-

trol .

One or more of the indicator lamps for

the" /" controls will flash.

The number of flashing indicators

shows the percentage of the operating

time which has already been used up.

Lamp 1 ........................................ 25 %

Lamps 1 and 2 ............................. 50 %

Lamps 1 to 3 ............................... 75 %

Lamps 1 to 4 ............................. 100 %

The number of operating hours used

remains in the memory, even when the

appliance is switched off or there is a

power cut.

The indicator lamp for the Grease fil-

ter control lights up blue or yellow

If the indicator lamp for the Grease filter

control lights up blue or yellow while the

hood is being used, another operating

hours counter which is not required has

been activated by mistake.

To deactivate it:

 Press the On/Off control  to switch

the fan off.

 Press the  control and the Grease

filter control  at the same time.

The indicator lamp for the Grease filter

control  will light up blue or yellow

and one of the "/" indicator lamps

will flash.

 Press the  control repeatedly until

the fourth "/" indicator lamp lights

up.

 Confirm with the Grease filter con-

trol .

All the indicator lamps will go out.

Operation