Miele 7080 850 작동 및 설치 지침 - 페이지 12

{카테고리_이름} Miele 7080 850에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele 7080 850 14 페이지.

Installing in kitchen furniture unit

Do not install the appliance near a heater or cooker.

Check kitchen unit interior dimensions against those shown

in the illustration.

Align the kitchen unit with a spirit level and a try square; if

necessary, place packing underneath until the unit stands

squarely. The intermediate shelf must be at a right angle to

the side panel of the kitchen unit.

For ventilation (air inlet and outlet paths), a vertical gap at

least 38 mm deep must be provided at the back of the appli-

ance.

Air inlet cross-section A: at least 200 cm2. Air must enter

through the plinth screen panel of the kitchen unit.

Check position of power socket

CD.

The power supply type

(AC)

and voltage where the appliance is used must agree

Fig. A

with the data on !he type plate.

The type plate is on the left inside wall, next to the vegetable

bins. Allow the appliance to stand for about 1/2 to 1 hour after

transport, before connecting to the power supply. The appli-

ance must be connected to the mains power supply by

means of a properly earthed power socket and plug.

...-

('I)

C\J

...-

CX)

1"-

C\J

1"-