Miele F 1471 SF 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Miele F 1471 SF에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele F 1471 SF 24 페이지. Product and cut-out dimensions 72" side by side combination
Miele F 1471 SF에 대해서도 마찬가지입니다: 치수 (2 페이지), 작동 및 설치 지침 (29 페이지)

Miele F 1471 SF 설치 지침 매뉴얼
This merging kit should be used for
side-by-side installation of the following
models:
– K 18x1 SF, K 19x1 SF
– F 14x1 SF, F 18x1 SF, F 19x1 SF
– KF 18x1 SF, KF 19x1 SF
– KWT 16x1 SF
For side-by-side installation of
appliances with a stainless-steel
front, you also need a Top-frame.
Contact Miele to obtain a top-frame
in the required width. The width of
the Top-frame corresponds to the
total width of your side-by-side
combination.

Before you begin

Please read all instructions in this
manual, as well as the manual which
accompanied your machine, before
installation and use.
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured per the installation
instructions.
To reduce the risk of injury or
damage to the product, two people
should be used for installation.

Side-by-side

. . . without partition

If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
Installing the heating mat will
increase energy consumption.
en
3