Miele F 1913 SF 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} Miele F 1913 SF에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele F 1913 SF 33 페이지.
페이지 인쇄Installation with partition using the
"Merging Kit"
The minimum thickness of the partition
5
is
/
" (16 mm).
8
If there is a partition with a thickness
5
from
/
" (16 mm) to 6
8
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
The "Merging Kit" will also be needed.
The "Merging Kit" is available from
Miele.
Installation with partition without
using the "Merging Kit"
If there is a partition with a thickness of
5
more than 6
/
" (160 mm) between
16
the adjacent appliances, then each
appliance should be individually
installed within its own niche using the
mounting accessories included (the
"Merging Kit" is not necessary).
5
/
" (160 mm)
16
Side panels
If one side of the appliance is visible, a
side panel must be used.
The side panel must be firmly secured
to the wall, the floor and the overhead
furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are
taken from the opposite wall of the
installation space. During installation,
ensure that the cavity is square and the
measurements are correct.
Installation
51