Miele K 11820 SD 작동 및 설치 지침 - 페이지 17
{카테고리_이름} Miele K 11820 SD에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 11820 SD 48 페이지. Refrigerator with dynamiccooling
Miele K 11820 SD에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (48 페이지), 작동 및 설치 지침 (44 페이지)
페이지 인쇄
Before using for the first time
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.
Protective foil
The stainless steel strips have a layer of
protective foil to prevent scratching
during transportation.
On stainless steel appliances, the
stainless steel door and possibly the
sides are covered in a protective foil.
^ Remove the protective foil only after
the appliance has been installed in
its intended location.
Cleaning
^ Clean the inside of the appliance and
the accessories with lukewarm water
and then dry with a soft cloth.
Switching on
^ Press the On/Off button. The
temperature display will light up.
The appliance begins to cool down, and
the temperature required shows in the
temperature display. The interior light
will come on when the door is opened.
Switching on and off
Switching off
^ Press the On/Off button until the
temperature display goes out.
The cooling system is switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ switch off at the wall and withdraw
the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable,
^ clean the appliance out and
^ leave the door ajar to air the appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
17