Miele K 12421 SD 운영 및 설치 매뉴얼 - 페이지 39

{카테고리_이름} Miele K 12421 SD에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 12421 SD 48 페이지. Refrigerator with dynamic cooling

^ Pull out spacer pin p from beneath

the left-hand side of the door.

^ Open the door.

^ Holding the door at the bottom and

on the handle side, carefully lift it

upwards and off.

This will release hinge pin e with

washer o from hinge plate d. If it

does not release:

^ Press hinge pin e with washer o out

of the hinge plate from below.

Changing the door hinging

^ Undo screws f and take hinge plate

d off.

^ Undo the screw of hinge part g on

hinge plate d slightly. Fit it into the

hole opposite in hinge plate d and

tighten up the screw.

^ Remove plug h and place it in the

opposite hole in the hinge plate.

^ Remove cover i.

^ Unscrew and remove screw j and

refit it into the outer hole of the

opposite side.

^ Turn cover i through 180°, and fit it

into the holes on the other side.

^ Screw hinge plate d into position on

the opposite side using the two outer

long slots only. Do not use the middle

hole because you will not be able to

align the door later on.