Miele K 12421 SD 운영 및 설치 매뉴얼 - 페이지 44

{카테고리_이름} Miele K 12421 SD에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 12421 SD 48 페이지. Refrigerator with dynamic cooling

Building in the appliance

a Top box

b Appliance

c Housing unit

d Wall

The appliance can be installed in a

kitchen run. To match the height of the

rest of the kitchen, the appliance can

be fitted with a suitable top box a.

A ventilation gap of at least 50 mm

depth must be allowed for behind the

appliance across the entire width of the

top box for air to circulate.

The cross section of the air outlet under

the room ceiling must be at least

300 cm

to ensure that air can circulate

without hindrance. Otherwise the

appliance has to work harder, resulting

in an increase in electricity

consumption.

The air inlet and outlet must not be

covered or blocked in any way.

They should be dusted on a regular

basis.

When built into a kitchen run (max.

depth 580 mm) the appliance can be

installed directly next to a kitchen

furniture housing unit. The appliance

door will protrude in front of furniture

fronts at the sides by 34 mm and by

55 mm in the middle of the door. This

enables the doors to be opened and

shut without being obstructed.

When installed next to a wall d a

distance of approx. 55 mm must be

maintained on the hinge side between

the wall d and the appliance b, so

that the doors and the handles have

sufficient space for opening.