Miele K 12820 SD edt 운영 및 설치 매뉴얼 - 페이지 35
{카테고리_이름} Miele K 12820 SD edt에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 12820 SD edt 40 페이지. Refrigerator with dynamiccooling
Miele K 12820 SD edt에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (48 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지)
페이지 인쇄
^ Remove cover a by pulling it
forwards.
^ With the help of another person,
carefully tilt the appliance backwards
and pull hinge pin b out.
^ Do not lose hinge bush c.
^ Undo screws d and take hinge plate
e off.
^ Remove cover f and fit it into the
holes on the opposite side.
^ Unscrew bearing g from hinge plate
e and screw it into the hole on the
other side of hinge plate e.
Changing the door hinging
^ Screw hinge plate e into position on
the opposite side using the two outer
long slots only. Do not use the middle
hole because you will not be able to
align the door later on.
^ Using a second person, carefully tip
the appliance backwards and then fit
hinge pin b together with hinge bush
c from below into hinge plate e on
the left hand side.
^ Refit cover a on the left.
^ Place the door onto hinge pin b.
^ Close the appliance door.
35