Miele K 12820 SD edt 작동 및 설치 지침 - 페이지 12

{카테고리_이름} Miele K 12820 SD edt에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 12820 SD edt 44 페이지. Refrigerator with dynamiccooling
Miele K 12820 SD edt에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (48 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지)

페이지 인쇄

Switching on and off

Before using for the first time

^ Clean the inside of the appliance and

the accessories with lukewarm water

and a little washing-up liquid, and

then dry with a soft cloth.

Switching on

^ Press the On/Off button.

The temperature display and the alarm

indicator light will flash until the freezer

has cooled down to the correct

temperature for freezing.

To enable the temperature to get

sufficiently cold inside the appliance,

allow it to run for a few hours until it has

reached -18 °C before placing food in

it.

Cool pack

Place the cool pack in the top drawer. It

will be at its most effective after it has

been in the freezer for approx. 24 hours.

Switching off

^ Press the On/Off button until the

temperature display goes out.

All the displays will go out and the

cooling system will switch off.

Switching off for longer

periods of time

If the appliance is not going to be used

for a longer period of time, e.g. whilst

on holiday:

^ switch the appliance off,

^ disconnect it from the mains,

^ clean the appliance out and

^ leave the door ajar to air the

appliance.

If, during a long absence, the

appliance is switched off but not

cleaned out and the door is left shut,

there is a danger of mould and

odours building up inside the

appliance.