Miele K 2601 Vi 매뉴얼 - 페이지 4
{카테고리_이름} Miele K 2601 Vi에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 2601 Vi 34 페이지.
페이지 인쇄
Installation
Side-by-side units
This appliance can be installed side by
side with another refrigeration
appliance. The following overview will
show you which side-by-side
installation options you have with your
refrigeration appliance.
Depending on the installation
situation, you may need the side-by-
side installation kit (see "Accessories -
Optional accessories").
Instructions for installing appliances
side by side can be found in the side-
by-side installation kit installation
instructions.
. . . with partition wall
The wall a between the side-by-side
refrigeration appliances must be at
least 16 mm thick.
11618780-01
If the door hinges of the appliances
are next to each other, you must take
into account the thickness of the
cabinet fronts and door handles so
that the appliance doors do not
collide and become damaged if they
are opened at the same time.
The appliances are secured individually
in their niche using the supplied
installation material.
If the partition wall a is between 16 mm
and 160 mm, you will need the side
panel heater from the side-by-side
installation kit to prevent condensation
from forming and any resulting damage.
When planning installation niches,
please note that the niche into which
the refrigeration appliance with the
side panel heater is installed must be
4 mm wider (see "Installation –
Installation dimensions").
If the partition wall a is thicker than
160 mm, you do not need the side-by-
side installation kit, nor the side panel
heater.