Miele K 31222 Ui 매뉴얼 - 페이지 7
{카테고리_이름} Miele K 31222 Ui에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 31222 Ui 11 페이지.
![Miele K 31222 Ui 매뉴얼](/uploads/products/server2/3443010/3443010.png)
Securing the appliance in the
niche
1. Top mounting
2. Side mounting
Screw the appliance into position on
the right and the left.
10841790-04
Installing the appliance
Fitting a furniture door
If the appliance is being built into a run
of units, the height of the furniture
door should be aligned with adjacent
kitchen units.
The furniture door must be mounted
plane and free of tension.
The following chapter describes the
installation of a furniture door with a
furniture front of at least 16-19 mm
thickness.
Ensure that the plinth panel is refitted
correctly.
A gap of 8 mm is set at the factory
between the appliance door and the
fixing bracket. Double-check this gap
and adjust it if necessary.
Push the fitting aids up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see
in diagram).