Miele K 5122 Ui 작동 및 설치 지침 - 페이지 32

{카테고리_이름} Miele K 5122 Ui에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 5122 Ui 44 페이지. Refrigerator
Miele K 5122 Ui에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

페이지 인쇄

Electrical connection

The appliance is supplied with a power

cable and moulded plug ready for con-

nection to an AC 230 V 50 Hz supply.

The fuse rating must be at least 10 A

(13 A in the UK).

This appliance must be connected to a

suitable switched socket which is easily

accessible. The electrical connection

must comply with current local and na-

tional safety regulations (BS 7671 in the

UK).

The accessibility of the plug must al-

ways be ensured in order to be able to

quickly separate the appliance from the

mains.

If the mains socket is not accessible

after the appliance has been built in, a

separator for each terminal must be

present. There must be an all-pole con-

tact gap of at least 3 mm in the switch

(including switch, fuses and relays ac-

cording to EN 60335).

The plug and mains connection cable

must not come into contact with the

back of the appliance as vibrations can

cause damage to these components.

This, in turn, could result in a short cir-

cuit.

Do not plug in other appliances behind

this appliance.

Do not connect the appliance to the

mains electricity supply by an extension

lead. Extension leads do not guarantee

the required safety of the appliance

(e.g. danger of overheating).

Do not connect the appliance to an in-

verter such as those used with an

autonomous energy source e.g. solar

power. When switched on, peak loads

in the system can cause the safety

switch-off mechanism to be triggered.

This can damage the electronic unit.

The appliance must not be used with

so-called energy-saving devices

either. These reduce the amount of en-

ergy supplied to the appliance, causing

it to overheat.

If the mains cable needs to be replaced

this must be done by a suitably quali-

fied person.