Miele K 852i 운영 및 설치 매뉴얼 - 페이지 26

{카테고리_이름} Miele K 852i에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 852i 44 페이지.
Miele K 852i에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (40 페이지)

^ Check to see whether the light switch

can be moved.

If it moves, the light bulb could be

defective and need to be replaced:

^ Disconnect the appliance from the

mains. Switch off at the wall and

withdraw the plug from the socket

(pull by the plug not the cable), or

disconnet the mains fuse or remove

the screw-out fuse in countries where

this is applicable.

^ Press the sides of the lamp cover

inwards, disengage the cover and

unclip it at the rear.

^ Unscrew the bulb and replace it with

a new one.

Bulb specification:

220 – 240 V, max. 25 W, E 14 fitting

^ When fitting in the new bulb make

sure that it is correctly fitted.

^ Clip the lamp cover back in at the

rear and then press it into position

from the sides.

The drain hole has become blocked.

^ Clean the condensate channel and

drain hole.

If you still cannot remedy the fault

having followed these suggestions,

then contact the Miele Service

Department.

To prevent unecessary loss of

temperature it is advisable not to

open the door while waiting for the

appliance to be serviced.