Miele K 8852 SD 작동 및 설치 지침 - 페이지 22

{카테고리_이름} Miele K 8852 SD에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 8852 SD 37 페이지. Refrigerator with dynamic cooling

Miele K 8852 SD 작동 및 설치 지침
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
Some minor problems can be corrected
without contacting the Service
Department.
^ Make sure that the temperature dial is
not pointing to the "0" position.
^ Check that the plug is correctly
inserted in the socket and switched
on.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, contact the Miele Ser-
vice Department.
^ Turn the temperature selector to a
setting closer to "0".
^ The Super cool function is still
switched on. Super cool only
switches itself off after 6 hours.
22
^ Check whether the ventilation gaps
have been covered over or become
too dusty.
^ Check whether, the metal grille (heat
exchanger) at the back of the
appliance has become too dusty.
^ The appliance door is being opened
frequently.
^ Check that the door has been closed
properly.
^ Make sure that the temperature dial is
not pointing to the "0" position.
If it is not pointing to the "0" position the
bulb is defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^ Press the sides of the lamp cover
together a, disengage the cover and
unclip it at the rear b.